Operating your radio - FM | FM Radio |
1. Carefully extend the wire aerial and press the On/Off button to switch |
|
on your clock radio. | 1 |
2. Press the Band button as needed to select the FM mode display.
3. | Press and hold the Tuning Up button. The displayed frequency will |
| 2 |
| increase. Your radio will scan up the FM band from the currently |
|
|
| displayed frequency and will stop scanning when it fi nds a station of |
|
|
| suffi cient strength. |
|
|
4. | The display will show the frequency of the signal which has been |
|
|
| found. If RDS information is available, after a few seconds the display | 5 | |
| will show the radio station name. | ||
|
|
|
Ifyouonlyhearhissorinterference,simplypresstheTuningUpbuttton to scan further. Your radio may have found a spurious interference signal.
5.To fi nd more FM stations press the Tuning Up button to repeat the scan operation. To scan down in frequency, press and hold the Tuning
Downbutton .Your radio will scan down the FM band from the currently displayed frequency and will stop scanning when it fi nds a signal of suffi cient strength.
6. When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband.
7
7. Use the Volume buttons to adjust the sound level as needed. | 7 |
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
36