Headphone socket
1. A 3.5mm Headphone Socket located on the rear of your clock radio is provided for use with headphones. Inserting a plug automatically mutes the internal loudspeaker.
IMPORTANT:Excessivesoundpressurefromearphonesandheadphones can cause hearing loss.
Your clock radio is supplied set up for best audio quality from the built in loudspeaker. If you wish to use headphones you may set the audio settings so as to give best quality when listening via headphones.
1. When the radio is playing press and hold the Select/Tone button 'Off' |
|
will show on the display. The clock radio will select the Audio menu | |
which allows bass and treble adjustment as well as alternative access |
to the main Mode menu.
2. To adjust the headphone audio setting, press the Tuning Up or Down buttonsuntil'HeadphoneEQ'isdisplayed.PressandreleasetheSelect button. The display will show the current Headphone EQ setting.
2,32,3
3. Press the Tuning Up or Down buttons to set the headphone EQ to On or to Off. Press the Select button to confi rm selection.
Line out socket (3.5mm Jack)
A3.5mm Line Out socket located on the rear of your clock radio is provided for connecting the audio signal to an external amplifi er. Inserting an audio cable into this socket will not mute the internal loudspeaker. Set the volume control on the clock radio to minimum if desired.
Display and Audio
If you need any further advice, please call our Technical Helpline on :-
52
020 8758 0338