Factory reset

If you wish to completely reset your radio to its initial state this may be

 

performed by following this procedure. By performing a factory reset, all

 

user entered settings will be erased.

1

 

1.Access the main mode menu by pressing the Back button then press the Tuning Up or Down buttons until 'Settings' is displayed.

2. Press the Select button to enter the Settings menu. Press the Tuning

 

 

Up or Down buttons until 'Factory Reset' is displayed.

1-3

1-3

3.Press the Select button 'NO' will fl ash on the display. Press the Tuning Up or Down button until 'YES' is fl ashing on the display to proceed with the system reset.

If you do not wish to carry out a system reset, select 'NO' and then

 

press the Select button. The display will revert to the previous

 

menu.

2-4

4.With 'YES' fl ashing on the display, press the Select button. A full reset will be performed. The station list together with any preset stations will be erased and your wireless network connection details will be lost. All confi guration settings will be restored to their defaults, the clock and alarms will be reset.

In case of malfunction for any reason, reset the product as described above to resume normal operation. It may be necessary in some cases to disconnect the mains power then reconnect power after 10 seconds.

In case of malfunction due to electrical fast transient (burst), reset the product as above (reconnection of the power source may be required) to resume normal operation.

If you need any further advice, please call our Technical Helpline on :-

Information

020 8758 0338 (Mon-Fri)

54