2.Press RECORD. Both RECORD and PLAY lock down. When RECORD is pressed down, every call made or received is recorded.
Notes:
•If you set REC MODE to VOX, when both parties are silent for about 5 seconds, the recorder stops recording until someone starts speaking again.
•The VOLUME setting does not affect the recording level.
•VU/LEVEL flashes during record- ing.
Setting the Record Mode
When REC MODE is set to VOX, the re- corder begins recording when it receives sound through the microphone or phone line, and stops recording when it does not receive sound for about 5 seconds.
DC 6V 300mA | VOX NORM | STD EXT |
OFF ON | ||
MONITOR | REC MODE | SPEED |
Set REC MODE to NORM to record con- tinuously until the tape reaches the end or you press STOP/EJECT.
0 0 0 | VU | |
LEVEL | ||
|
MIC
TELEPHONE CASSETTE RECORDER
•To temporarily stop recording, press PAUSE. To resume record- ing, press PAUSE again.
|
|
| REVIEW |
| CUE | STOP/EJECT |
|
RECORD | PLAY | REWIND | PAUSE | ||||
•If the tape reaches the end during a recording, it automatically releases RECORD and PLAY, and stops.
3.To stop recording, press STOP/
EJECT.
Setting the Sensitivity Level
When you set REC MODE to VOX, you must set the sensitivity level located on the bottom of the recorder. H (high) is the most sensitive setting and requires only a soft sound to begin recording. L (low) is the least sensitive setting and requires a louder sound to begin record- ing. If the tape does not stop after about 5 seconds of silence, set SENSITIVITY to M (medium) or L (low).
SENSITIVITY
L M H
CAUTION
ALWAYS DISCONNECT ALL TELEPHONE
LINES FROM THE WALL OUTLETS BEFORE
SERVICING OR DISASSEMBLING THIS
EQUIPMENT, OR REPLACING BATTERIES.
9
