Rockford Fosgate 160X4, 240X4 operation manual Mono Operation

Mono Operation	Input
	2-Ch.
	{
+ L–	+ R–	– L+	– R+
+	–	–	+
4 ohm		4 ohm
	2-Channel Input
	Rear XCard*	Front XCard*
	LP	LP
	Rear XCard	Front XCard
*Note: XCard can be inserted in HP, LP, or Full Range
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear operates independently
• Impedance for front bridged channel should be no less than 4Ω
• Impedance for rear bridged channel should be no less than 4Ω
• Front XCard can be set for High-Pass, Low-Pass or Full Range
• Rear XCard can be set for High-Pass, Low-Pass or Full Range
	– 17 –