Lincoln Electric SVM149-A service manual Installation, Technical Specifications PRO-CUT 25 K1756-1

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

A-2		INSTALLATION			A-2
	TECHNICAL SPECIFICATIONS - PRO-CUT 25 (K1756-1)
		INPUT - SINGLE PHASE / 60 HERTZ ONLY
		Standard Voltage	1Ø Input Current at Rated Output
		115/230/1/50/60Hz	115	V : 15 A @ 20%
			115	V : 26.7A@ 60%
			115	V : 37.7A@ 35%
			230 V : 15 A@100%
			230 V : 19 A @ 60%

RATED OUTPUT

Duty Cycle	AMPS
20% on 115 V	15 A
60% on 115 V	20 A
100% on 230 V	20 A
35% on 115 V	25 A
60% on 230 V	25 A

	OUTPUT
Current	Open Circuit	Pilot Current
Range	Voltage
12-25 Amps	400 VDC	12 Amps

	REQUIRED GAS FLOW RATE					REQUIRED GAS INLET PRESSURE
	55 PSI @ 240 SCFH							65 to 150 PSI
	( 3.8 Bar. @ 6800 LHR)						(4.5 Bar. TO 10.3 Bar.)
		RECOMMEND INPUT			WIRE AND FUSE SIZES
			For all plasma cutting applications
			Based on U.S. National Electrical Code
			Ambient Temperature 30oC or Less
Output	AC Input		Input Cord			Fuse		Type 75oC
	Voltage		Plug	(Super Lag)				Copper Wire in Conduit
	at		Size	Circuit Breaker				AWG (IEC) Sizes
	50/60			(Delay Type)
	Hertz						2 Input Supply Wires		1 Ground Wire
25 A	230V-1Ø				20 AMPS			#14 (2.5 mm2)	#14 (2.5 mm2)
		6-20P or 6-30P or 6-50P
15 A	115V-1Ø	5-15P* or 5-20P* or 5-30P or 5-50P			15 AMPS			#12 (4 mm2)	#12 (4 mm2)
20 A	115V-1Ø	5-20P* or 5-30P or 5-50P			20 AMPS			#12 (4 mm2)	#12 (4 mm2)
25 A	115V-1Ø		5-30P or 5-50P		30 AMPS			#12 (4 mm2)	#12 (4 mm2)
			PHYSICAL DIMENSIONS
	Height		Width			Depth		Weight
								Including
								Torch Cable
	10.2 in.		6.3 in.			16.1 in.		35 lbs.
								15.9 kg.
	260 mm		160 mm			410 mm

* Included with machine

PRO-CUT 25