INSTALLATION

INSTALLATION CONSIDERATIONS

 

The following is a list of tools needed for installation:

 

Volt/Ohm Meter

Hand held drill w/assorted bits

Wire strippers

1/8" diameter heatshrink tubing

Wire crimpers

Assorted connectors

Wire cutters

Soldering iron

#2 Phillips screwdriver

Solder

Battery post wrench

Heat gun

This section focuses on some of the vehicle considerations for installing your new Source Unit. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

CAUTION:If you feel unsure about installing this system yourself, have it installed by a qualified technician.

CAUTION:Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Source Unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

The mounting position of your source unit will have a great effect on the performance of your in-dash CD Player.The source unit can be installed in a wide range of operating locations. However, care should be taken to ensure optimum performance.

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Instrument Panel

Mounting the source unit in the instrument panel provides optimum access.The source unit should be securely mounted using the “Standard Mount” or “ISO-DIN Mount” method to ensure optimum CD Player performance.

5

Page 5
Image 5
Rockford Fosgate RFX9220M manual Engine Compartment, Instrument Panel

RFX9220M specifications

The Rockford Fosgate RFX9220M is a powerhouse marine-grade digital media receiver designed to elevate your audio experience while out on the water. Built for durability and performance, this receiver boasts a host of features that cater to both music enthusiasts and casual listeners alike.

One of the standout characteristics of the RFX9220M is its IPX6-rated water resistance. This means that it is specifically engineered to withstand water splashes and exposure to the elements, making it perfect for boating, jet skiing, or any marine activities. The rugged design ensures that your audio equipment remains safe while enhancing your outdoor adventures.

In terms of audio performance, the RFX9220M includes a high-efficiency built-in amplifier that delivers robust sound quality. With its peak power output, it can drive your connected speakers effectively, providing a rich sound experience. The receiver also features a variable bass boost, allowing users to customize their low-end response based on individual preferences.

The RFX9220M is equipped with Bluetooth connectivity, enabling hassle-free wireless streaming from smartphones and other compatible devices. The receiver supports hands-free calling and streaming, ensuring you can stay connected while focusing on the waves. Additionally, it is equipped with a USB port that allows for direct playback of music from flash drives, providing another option for enjoying your favorite tunes while on the water.

Users will appreciate the large, easy-to-read LCD display, which is designed for visibility whether you are in bright sunlight or under cloudy skies. The user interface is intuitive, allowing for easy navigation through various settings and playback options. The receiver also supports multiple audio formats, ensuring that your music collection, regardless of the source, can be played seamlessly.

Furthermore, the RFX9220M includes customizable equalizer settings that let you fine-tune the audio output according to your listening environment. With multiple preamp outputs, the receiver can effortlessly connect to additional amplifiers, enhancing the overall sound system for enthusiasts craving greater power and dynamism.

In summary, the Rockford Fosgate RFX9220M is an exceptional choice for anyone looking to upgrade their marine audio system. With its rugged construction, impressive sound quality, and user-friendly features, it perfectly combines functionality and style, making it a worthy investment for days spent on the water.