Rockford Fosgate RFX9220M manual Operation Basic Volume KNOB/TONE Controls, Setup Options

OPERATION – BASIC

VOLUME KNOB/TONE CONTROLS
The Volume knob is a multifunction controller and handles the			SEL
Volume,Tone Controls, and Setup Options, see below.
To Control Volume
1.	Turn the VOLUME knob (Volume Outside) clockwise to raise
	volume.
2.	Turn the VOLUME knob (Volume Outside) counter-clockwise	Turn Outside	Remote
	to lower volume.
To Adjust Tone Controls			SEL
1.	Press the SELECT button (Volume Center) repeatedly to
	cycle through SUM > BASS > TREBLE > BALANCE >
	FADER > VOLUME.
2.	Turn the VOLUME knob (Volume Outside) to increase,
	clockwise, or decrease, counter-clockwise, the selected	Press Center
	function.

Source Tone Memory

Individual Bass & Treble settings are memorized for TUNER / CD PLAYER / CD CHANGER / AUX1.

NOTE: If no adjustment is made after 5 seconds, the MENU knob will revert to VOLUME mode.

SETUP OPTIONS

The list below shows the default Setup Options.The bracketed items are the alternate options contained within each Setup Option.

Selecting Options

1.Press and hold the SELECT button (Volume Center) for about 1 second until the first Option appears {LOCAL}.

2.Press the SELECT button (Volume Center) repeatedly to cycle through all Setup Options.The first three options only affect the Tuner Mode.

3.To change an Option, press the UP or DN {Down} Button

( or ).

Press & Hold Center

Remote

4.To store, wait 5 seconds and the Display will return to the last Mode shown.

•LOCAL [DX] — Adjusts the sensitivity of the tuner for rural conditions where there are weak radio stations while Local adjusts the sensitivity for city conditions where there are several strong radio stations.

•AMERICAS [EUR/AUST] — Allows tuning of frequencies available in different parts of the world.

•P. PLAY [EJ MUTE] — Plays the Tuner after you eject a CD while Eject Mute mutes the Tuner after you eject a CD.

SEL

ENT

•V/BAR ON [V/BAR OFF] — Displays the Volume Bar at the bottom of the Front Panel while Volume Bar Off turns it off.

•INI VOL 15 — Sets the maximum Initial Volume when the unit turns on. Initial Volume sets point of maximum volume when the unit is turned on. If the volume setting was lower than the initial volume setting when the unit is turned off, then the lower volume will be used at turn on. If the volume setting was higher than the initial volume setting, then the initial volume setting is used at turn on.This feature prevents accidental high volume turn on as well as allows high volume settings to be retained in case another preamplifier is the system’s main volume control.

•CONTRAST [VIEW 6] — Controls the view angle of the display. Allows adjustment for best visibility.

•SUM FLAT [80HZ] — Means third pair of RCA pre-outs is full-range while 80Hz means that the pre- outs are crossed-over 80Hz low-pass for subwoofer use.

11