T R O U B L E S H O O T I N G

K a n d y Power Amplifier 2 Channel

 

 

 

 

 

 

 

If you suspect that your ROKSAN Kandy Power Amplifier is not operating properly, you should check all the connections carefully. Pay particular attention to speaker phasing and channel connections. Phono plugs should be fully inserted- a frequent cause of problems is that Phono plug surrounds do not make proper contact. Below are some commonly encountered problems with suggestions for possible cure. The list is not exhaustive: If you have any unresolved problems, please consult your appointed ROKSAN dealer or distributor.

SYMPTOM

LIKELY CAUSE

SUGGESTED REMEDY

No power

AC Mains lead not inserted properly

Ensure AC Mains lead is fully inserted

 

Unit not switched on at rear panel

Switch unit on at rear panel

No output on one or more

Missing or bad input signal connection

Check all input connections

channels

Incorrect speaker connection

Check speaker output connections on

 

 

rear panel

Lower output on one or both

Higher trim on one or both channels

Check trim level and adjust accordingly

channels

 

 

Poor speaker imaging, lack

Loudspeakers connected out of phase

Check polarity of speaker connections

of Bass output

 

(especially important if Multi-wiring,

 

 

Multi-amping)

Hum from speakers

Incorrect Grounding

Check Mains polarity and grounding on

 

 

all connected equipment

 

GUARANTEE

K a n d y Power Amplifier 2 Channel

 

 

 

 

 

 

 

There are no user-serviceable parts inside your Kandy Power Amplifier. If a fault should develop, refer any servicing to your appointed ROKSAN dealer, distributor or ROKSAN approved service agent.

Your ROKSAN Kandy Power Amplifier is guaranteed against any defect in materials and workmanship for a period of two years from the date of purchase.

This guarantee only becomes effective if the warranty card is validated by the ROKSAN retailer from whom the equipment was purchased and returned to ROKSAN within 28 days of purchase.

This guarantee excludes:

1.Damage caused due to accident, missuse, neglect and incorrect installation, adjustment or repair.

2.Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised distributor for the purposes of repair or inspection.

Carriage costs to ROKSAN shall be borne by the consignor.

All claims under this guarantee must be made through an authorised ROKSAN retailer.

If equipment returned for repair to ROKSAN is found on inspection to comply with the product specification ROKSAN reserves the right to make a charge for examination and return carriage.

Unauthorised servicing will void this guarantee.

Roksan Audio ltd

Kandy Power Amplifier 2-Channel User Manual

CLASSIFICATION: General Use

Version 1.01

All specifications are liable to change without notice. E&OE

Page 9 of 10

ENGLISH

Page 9
Image 9
Roksan Audio L III user manual Troubleshooting, Guarantee

L III specifications

The Roksan Audio L III is a high-fidelity loudspeaker designed to deliver exceptional sound quality, combining advanced engineering with elegant aesthetics. This speaker is a testament to Roksan's commitment to producing audio equipment that meets the needs of discerning audiophiles.

One of the main features of the L III is its sophisticated two-way design. It incorporates a 5-inch mid/bass driver and a 1-inch tweeter, which work together to create a balanced sound profile. The mid/bass driver is engineered using a lightweight, stiff cone material that enhances transient response and provides deep bass reproduction. The tweeter features a fine silk dome, ensuring smooth high-frequency response and remarkable detail without harshness.

The Roksan L III is built with a focus on acoustic efficiency. Its cabinet is meticulously constructed to minimize resonances, allowing for a more accurate soundstage. The internal bracing is strategically placed to provide additional support, reducing unwanted vibrations that can color the sound. The design of the cabinet also aids in controlling the bass response, resulting in a clean and articulate low-end.

Another hallmark of the L III is its versatile connectivity options, allowing it to integrate seamlessly into a variety of audio systems. The speakers can easily handle a wide range of amplifier powers, making them suitable for both small setups and more powerful systems. The impedance rating ensures compatibility with most amplifiers, providing users with greater flexibility in matching with their existing gear.

The speaker's aesthetic design is not to be overlooked. With a sleek and modern finish, the Roksan L III is available in various color options, allowing it to complement any home décor. The front grille can be easily removed, showcasing the beautiful driver design and adding to the speaker's visual appeal.

Roksan has also implemented advanced technologies in the L III to optimize performance. The speaker benefits from a proprietary crossover network that employs high-quality components, ensuring accurate frequency division and phase coherence. This results in a more natural sound representation, allowing listeners to experience their favorite music as intended by the artist.

In summary, the Roksan Audio L III is a remarkable loudspeaker that combines advanced technology, elegant design, and outstanding performance. With its carefully crafted drivers, robust construction, and versatile connectivity, it stands as a prime choice for those seeking a premium audio experience. Whether used for critical listening or casual enjoyment, the L III delivers sound that captivates and resonates with listeners.