Roksan Audio MkIII Setup, Connecting Mains Power, Signal Connections, Front L&R or Stereo, Centre

SETUP K a n d y Dual Laser DVD Player

CONNECTING MAINS POWER

Please refer to the rear panel view on page 5.The moulded connector of the supplied mains lead should be plugged into the socket (11, observe polarity) on the rear of the unit first and then plugged into the mains supply. If the unit is likely to be unattended for a long period, unplug the mains lead from the wall.

SIGNAL CONNECTIONS

ANALOGUE OUTPUT:

Front L&R or Stereo

Front L&R Analogue Outputs (8) are RCA Phono sockets and should be connected to the DVD or LINE input of your Preamplifier, Integrated Amplifier or Audio Input of your TV.

The connections are: Right Channel – Red; Left Channel – White.

Surround L&R

Surround (REAR) L&R Analogue Outputs (9) are RCA Phono sockets and ideally should be connected to the TRIMMED L&R Input of your Kandy 3 channel Power Amplifier or an Audio Input of a Multichannel Amplifier.

The connections are: Right Channel – Red; Left Channel – White.

Centre

Centre Analogue Output (3) is RCA Phono socket and ideally should be connected to the TRIMMED C Input of your Kandy 3 channel Power Amplifier or an Audio Input of a Multichannel Amplifier.

The connection is: Centre Channel – Black.

Subwoofer

Subwoofer (SUB) Analogue Output (4) is RCA Phono socket and ideally should be connected to an Active Subwoofer.

The connection is: Subwoofer Channel – Black.

DIGITAL OUTPUTS:

There are two Digital Outputs, one Coaxial the other Optical. The Digital Output (1) is an Optical Tos-Link and should be connected to the Optical Tos-Link Digital Input of your DSP (Digital Surround-sound Processor).

The connection is: Optical Output – Tos-Link.

The Digital Output (2) uses a 75 Ohm RCA socket and should be connected to the

Coaxial Digital Input of your DSP.

The connection is: Coaxial Output – Orange.

SCART OUTPUT:

There is a SCART Output (10) for convenience that could be connected to the

SCART Input of your TV, Projector or Monitor.

The connection is: SCART.

VIDEO OUTPUTS:

There are three Video Outputs, one Composite, one S-Video and one Component.

The Composite Output (6) are RCA sockets and should be connected to the

Composite Video Input of your TV, Projector or Monitor.

The connection is: Composite Video – Yellow.

Roksan Audio ltd	Kandy DVD Player User Manual
CLASSIFICATION: General Use	Version 3.00

All specifications are liable to change without notice. E&OE Page 6 of 16 ENGLISH