Jura Capresso Z9 manual Filling the water tank, Connecting milk

1 Preparing and using for the first time

T Turn the grinder adjustment switch to the desired position while the grinder is running.

The espresso is prepared and the consistency of grind is adjusted.

T Close the bean container cover.

Filling the water tank		Daily maintenance of the machine and hygiene when handling milk,
		coffee and water are key to a perfect coffee result in the cup every
		time. You should therefore change the water daily.
	NOTICE Milk, sparkling mineral water or other liquids can damage the water
		tank or the machine.
		T Only fill the water tank with fresh, cold water.
		T Open the water tank cover.
		T Remove the water tank and rinse it with cold water.
		T Fill the water tank with fresh, cold water and reinsert the
		tank.
		T Close the water tank cover.

Connecting milk	Your IMPRESSA creates fine, creamy, feather-light milk foam with a
	perfect consistency. The most important requirement for frothing
	milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore
	recommend using a milk cooler or a vacuum milk container.
	T Remove the red protective cover from the cappuccino
	frother.
	T Attach the milk pipe to the cappuccino frother. To do this,
	attach the end of the milk pipe to the connector on the left-
	hand side of the cappuccino frother. Use the short pipe for
	a milk container and the long pipe for a milk carton.

15