4 Permanent settings in programming mode
4Permanent settings in programming mode
JWARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.
T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an seek medical attention.
T Keep children AWAY.
| Press the P button to enter programming mode. You can navigate | |
| through the program items and permanently save the required | |
| settings simply by turning the Rotary Switch and using the multi- | |
| function buttons. The following settings can be made: | |
|
|
|
Program item | Explanation | |
|
|
|
‘Maintenance | ‘Clean’, | T Start the required maintenance program here. |
status (1/7)’ | ‘Descale’ (only if filter is |
|
| not activated), |
|
| ‘Change the filter’ (only if |
|
| filter is activated), |
|
| ‘Clean the milk system’ |
|
|
|
|
‘Maintenance | ‘Rinse the coffee system’, | T Start the required rinse here. |
status (2/7)’ | ‘Rinse the milk system’ |
|
|
|
|
‘Product settings | ‘Programming’, | T Select your settings for specialty coffees, milk |
(3/7)’ |
| and hot water. |
|
| T Change the products assigned to the multi- |
|
| function buttons and product selector. |
‘Machine settings | ‘Choose language’, |
(4/7)’ | ‘Switch off after’, |
| ‘Save energy’, |
| ‘Factory setting’ |
T Select your language.
T Set the time after which the IMPRESSA should switch off automatically.
T Select an
T Reset the machine or the permanently set values of all products to the factory settings.
‘Machine settings | ‘Units’, | T Select the unit for the amount of water. |
(5/7)’ | ‘Display’, | T Change the display settings. |
| ‘Colour scheme’ |
|
|
|
|
27