Manuals / Jura Capresso / Kitchen Appliance / Coffeemaker

Jura Capresso Z9 manual Display messages, ‘Empty coffee, ‘Coffee grounds, container not, fitted.’

Models: Z9

1 60

Download 60 pages 5.56 Kb

Page 49

6 Display messages

		6 Display messages
6 Display messages

Message	Cause/Result	Action

‘Fill water tank.’	The water tank is empty. You cannot	T Fill the water tank (see Chapter 1
	prepare any products.	‘Preparing and using for the first
		time – Filling the water tank’).

‘Empty coffee	The coffee grounds container is full.
grounds container.’	You cannot prepare any products.

T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).

‘Coffee grounds	The coffee grounds container is not	T Fit the coffee grounds container.
container not	fitted. You cannot prepare any
fitted.’	products.

‘Empty drip tray.’	The drip tray is full. You cannot	T Empty the drip tray.
	prepare any products.	T Clean and dry the metal contacts
		on the back of the drip tray.

‘Drip tray not	The drip tray is not inserted correctly	T Fit the drip tray.
fitted.’	or is not inserted at all. You cannot
	prepare any products.

‘Press the Rotary	The system must be filled with water	T Turn the Rotary Switch to
Switch.’	or the IMPRESSA is prompting you to	continue with the maintenance
	continue an interrupted maintenance	program or to fill the system.
	program.

‘Fill bean	The bean container is empty. You	T Fill the bean container (see
container.’	cannot prepare any specialty coffees,	Chapter 1 ‘Preparing and using for
	but you can prepare hot water and	the first time – Filling the bean
	milk.	container’).

‘Aroma	The aroma preservation cover is not	T Fit the aroma preservation cover.
preservation cover	inserted correctly or is not inserted at
not fitted.’	all. You cannot prepare any products.

‘Not enough	There is insufficient ground coffee in	T The next time you prepare a
ground coffee.’	the machine; the IMPRESSA stops the	beverage, add more ground coffee
	operation.	(see Chapter 2 ‘Preparation –
		Ground coffee’).

‘Rinse the milk	The IMPRESSA is prompting you to
system.’	rinse the milk system.

T Press the Rotary Switch to start rinsing the milk system.

49

Image 49

Jura Capresso Z9 manual Display messages, ‘Empty coffee, ‘Coffee grounds, container not, fitted.’, ‘Drip tray not, Switch.’

Contents

IMPRESSA Z9 One Touch TFT Instructions for Use Your IMPRESSA Z9 One Touch TFT Symbol description SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDSPeople, including children, who JWARNINGJ CAUTION NOTICE ZNever fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel filler funnel for ground coffee. It will damage the functioning of the brewing chamber Control elements Page Setting up the machine 1Preparing and using for the first timeJURA on the Internet Filling the bean containerPrecondition The bean container has been filled ‘Machine is heating.’ ‘Filter rinsing complete’TPress the ‘Next’ button ‘Machine is heating.’ TOnly fill the water tank with fresh, cold waterDetermining the water Adjusting the grinderhardness Filling the water tank Connecting milk1Preparing and using for the first time Ways of preparing a beverage 2 PreparationJ WARNING U ‘Cappuccino’U‘Ristretto’ U‘2 ristretti’ U‘2 espressi’ U ‘1 portion milk’U‘2 coffees’ U‘Special coffee’ Preparation in ‘coffee à la carte’ mode Espresso and coffee‘Café à la carte’ Latte macchiato Special coffeecappuccino foam Warm milk and milkTPress the ‘Latte macchiato’ button ‘Please add ground coffee.’ Ground coffee‘Please select product ’ button.’ appears Permanently setting‘Please select product ’ appears on the display ‘Normal’, ‘X high’, ‘Low’ Hot water3Daily operation Switching on Daily maintenanceSwitching off ‘Maintenance 4Permanent settings in programming mode‘Clean’ ‘Clean the milk system’settings 6/7’ Product settings‘Switch-onrinse’ Volume ‘0.5 oz’ - ‘8.0 oz’‘Maintenance status 1/7’ Volume ‘0.5 oz’ - ‘15.0 oz’‘X high’ TPress the ‘Programming’ button. ‘Programming’OT Press the P button ‘Maintenance status 1/7’Renaming a product settings 3/7’ is displayedEnergy-savingmode ‘Coffee’ to ‘My coffee’‘Machine settings 4/7’ Automatic switch-off‘Save Level 2’ ‘Save No’TPress the ‘Switch off after’ button. ‘2 hrs.’ settings 4/7’ is displayedLanguage U‘All products’‘Reset this product to the factory setting?’ TPress the ‘Factory setting’ button‘Switch-onrinse’ / ‘Manual’ ‘Switch-onrinse’ / ‘Automatic’‘Maintenance settings 6/7’ Setting the waterU‘Rinse the milk system’ / ‘Automatic’ ‘Maintenance status 1/7’settings 5/7’ is displayed Display settings‘Machine settings 5/7’ Unit for amount of waterTPress the ‘Save’ button ‘Maintenance status 1/7’URinsing the machine ‘Rinse the coffee system’ 5MaintenanceRinsing the machine Cleaning the cappuccino frotherRinsing the cappuccino frother‘Water for cleaning milk system.’ ‘Cleaning agent for milk system.’T Keep children AWAY ‘Maintenance status 1/7’ Inserting and activating the filterTPress the ‘Filter’ button. ‘Use filter’ ‘Change filter.’ Changing the filter‘Maintenance status 1/7’ ‘Use only original JURA maintenance products!’ Cleaning the machineJ WARNING ‘Please select product ’ appears on the displaykT Press the Rotary Switch ‘Approximate duration 45 min.’ Descaling the machineJ WARNING ‘Fill water tank.’ ‘Empty drip tray.’TPress the ‘Start’ button ‘Machine is heating.’container Cleaning the bean6 Display messages Switch.’‘Empty coffee ‘Coffee groundsnow.’ ‘Clean machine‘Decalcify machine.’ or7 Troubleshooting ‘Empty drip tray.’ is Other ‘ERROR’‘Fill water tank.’ is ProblemTransport / Emptying the 8Transport and environmentally friendly disposalsystem Disposal9Technical data 10 Index A Page Page intentionally blank intentionally blank 11 JURA contact details/ Legal information