Jura Capresso Z9 manual Automatic switch-off, ‘Save Level 2’, ‘Save No’, ‘Machine settings 4/7’

4Permanent settings in programming mode

U

U

‘Save Level 2’

U After switching on, your IMPRESSA is ready for use for all specialty coffees with and without milk, as well as hot water.

USoon after the last preparation, the IMPRESSA stops heating up. After about 5 minutes the message ‘Energy Save’ is displayed.

‘Save No’

U All specialty coffees, specialty coffees with milk and hot water can be prepared without having to wait.

Example: Proceed as follows to change the energy-saving mode from ‘Save Level 1’ to ‘Save Level 2’.

Precondition: ‘Please select product:’ is displayed.

O T Press the P button. ‘Maintenance status (1/7)’

g T Turn the Rotary Switch until the program item ‘Machine settings (4/7)’ is displayed.

TPress the ‘Save energy’ button. ‘Save energy’

	TPress the ‘Save Level 2’ button.
	TPress the ‘Save’ button.
	‘Saved’ appears briefly on the display.
	‘Machine settings (4/7)’
	O T Press the P button to exit programming mode.
	‘Please select product:’
Automatic switch-off	By instructing your IMPRESSA to automatically switch itself off, you
	can cut down your energy consumption. If this function is activated,
	your IMPRESSA switches off automatically after the preset time
	following the last action on the machine.
	You can set the automatic switch-off for 15 minutes, 30 minutes
	or 1–15 hours.
	Example: Proceed as follows to change the switch-off time from
	‘2 hrs.’ to ‘1 hrs.’.
	Precondition: ‘Please select product:’ is displayed.
	O T Press the P button.
	‘Maintenance status (1/7)’

32