| 4 Permanent settings in programming mode |
Renaming a product | In the program item ‘Product settings (3/7)’ / ‘Programming’ you can |
| rename all the products stored on the start screen or the product |
| selector. |
| Example: Proceed as follows to change the product name from |
| ‘Coffee’ to ‘My coffee’. |
| Precondition: ‘Please select product:’ is displayed. |
| O | T Press the P button. |
|
| ‘Maintenance status (1/7)’ |
| g | T Turn the Rotary Switch until the program item ‘Product |
|
| settings (3/7)’ is displayed. |
|
| TPress the ‘Programming’ button. |
|
| ‘Programming’ |
|
| TPress the ‘Coffee’ button. |
|
| TPress the ‘Next’ button. |
|
| TPress the ‘Product name’ button. |
|
| ‘ABC’...‘Я’ |
| g | T Turn the Rotary Switch until the letter ‘M’ is highlighted. |
| k | T Press the Rotary Switch to confirm the letter ‘M’. |
|
| TPress the ‘abc’ button to change to lower case. |
| g | T Turn the Rotary Switch until the letter ‘y’ is highlighted. |
| k | T Press the Rotary Switch to confirm the letter ‘y’. |
|
| TContinue until ‘My coffee’ is displayed. |
|
| TPress the ‘Save’ button to confirm the product name. |
|
| ‘Saved’ appears briefly on the display. |
|
| ‘My coffee’ |
| O | T Press the P button to exit programming mode. |
|
| ‘Please select product:’ |
| In the program item ‘Machine settings (4/7)’ / ‘Save energy’ you can | |
| permanently set an | |
| E.S.M.©): | |
| U | ‘Save Level 1’ |
U After switching on, your IMPRESSA is only ready for use for specialty coffees and hot water. Before you can prepare a specialty coffee with milk, the machine must heat up.
U Soon after the last preparation, the IMPRESSA stops heating up. After about 5 minutes the message ‘Energy Save’ is displayed.
31