Jura Capresso Z9 manual Product settings

4Permanent settings in programming mode

Program item	Sub-item	Explanation
‘Maintenance	‘Filter’,	T Indicate whether you are operating your
settings (6/7)’	‘Water hardness’ (only if	IMPRESSA with or without a CLEARYL Blue filter
	filter is not activated),	cartridge.
	‘Switch-on rinse’,	T Adjust the water hardness.
	‘Rinse the milk system’	T Change the settings for the switch-on rinse
		and milk system rinse.

‘Information (7/7)’ ‘Product counter’, ‘Maintenance counter’, ‘Version’

T Keep track of all products prepared and view the number of maintenance programs performed.

Product settings

JWARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking.

T In the event of scalding, rinse affected area with cold water an seek medical attention.

T Keep children AWAY.

In the program item ‘Product settings (3/7)’ / ‘Programming’ you can make individual settings for all specialty coffees, milk and hot water. The following permanent settings can be made:

Product	Temperature	Coffee strength	Amount
Ristretto,	‘High’,	; (extra-mild),	Volume: ‘0.5 oz’ – ‘8.0 oz’
espresso,	‘Normal’,	;; (mild),	(25 ml – 240 ml)
coffee,	‘Low’	;;; (normal),
special coffee		;;;; (strong),
		;;;;; (extra-strong)
Two ristretti,	‘High’,	–	Volume: ‘0.5 oz’ – ‘8.0 oz’
two espressi,	‘Normal’,		(25 ml – 240 ml) (per cup)
two coffees	‘Low’
Latte macchiato,	‘High’,	; (extra-mild),	Amount of milk:
cappuccino	‘Normal’,	;; (mild),	‘3 sec.’ – ‘120 sec.’
	‘Low’	;;; (normal),	Interval: ‘0 sec.’ – ‘120 sec.’
		;;;; (strong),	Volume: ‘0.5 oz’ – ‘8.0 oz’
		;;;;; (extra-strong)	(25 ml – 240 ml)

28