Jura Capresso Z9 manual Warm milk and milk, Foam, TPress the ‘Latte macchiato’ button

2 Preparation

TPress the ‘Latte macchiato’ button.

‘Latte macchiato’, the milk foam is prepared.

Preparation stops automatically when the preset amount of milk is reached.

EThere is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in program- ming mode (see Chapter 4 ‘Permanent settings in program- ming mode – Product settings’).

	Coffee preparation starts. The preset amount of water for
	espresso flows into the glass.
	Preparation stops automatically. ‘Please select product:’
	appears on the display.
	To ensure that the cappuccino frother always works properly, you
	must clean it daily when you have been preparing milk (see
	Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
	IMPRESSA will not prompt you to clean the cappuccino frother.
Warm milk and milk	Example: Proceed as follows to prepare hot milk at the touch of a
foam	button.
	Precondition: ‘Please select product:’ is displayed. Milk is connected
	to the cappuccino frother.
	T Place a cup under the cappuccino frother.
	T Turn the setting wheel of the cappuccino frother to the Milk
	position z.
	E If you want to prepare milk foam, turn the setting wheel of
	the cappuccino frother to the Milk Foam position ü.
	TPress the ‘1 portion milk’ button.
	The hot milk is prepared. The preset amount of milk flows
	into the cup.
	Preparation stops automatically. ‘Please select product:’
	appears on the display.
	To ensure that the cappuccino frother always works properly, you
	must clean it daily when you have been preparing milk (see
	Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
	IMPRESSA will not prompt you to clean the cappuccino frother.

21