13
Deutsch Français Italiano Español Português NederlandsEnglish
Display Value Explanation
C66 CC66 ( SOSTENUTO) Sustain the notes that are currently
being held down.
C71 CC71 ( RESONANCE)
Control the resonance. Increasing
the resonance value will produce
a distinctive tonal character that is
typical of a synthesizer.
C72 CC72 ( RELEASE TIME)
Control the time from note-o (when
the key is released) until the sound
is no longer heard (i.e., the release
time).
C73 CC73 ( ATTACK TIME) Control the sharpness (attack speed)
with which the sound begins.
C74 CC74 ( CUTOFF)
Control the cuto . Higher values will
make the sound harder (brighter);
lower values will make the sound
softer (more mellow).
AFt AFTERTOUCH
(Default)
Apply the most suitable e ect for
each of the Lucina AX-09’s tones.
Adb ADLIB
By  ngering a chord and moving
your hand above the D Beam
controller, you can produce an
arpeggio of that chord.
The distance from the D Beam
controller will determine the octave
span of the chord that is played, and
the speed at which you move your
hand up and down will determine
the speed at which the chord is
arpeggiated.
For example if you use your right
hand to hold down the four notes
“C D E G” and move your left hand
above the D Beam controller, a
phrase such as “C D E G C D E G C D E
G...” will play.
SLo SOLO SYNTH
The Lucina AX-09 will operate as a
monophonic synthesizer whose pitch
can be controlled by moving your
hand above the D Beam controller.
MEMO
By holding down the [INC/+] / [DEC/–] button you can
choose this setting rapidly. To choose even faster, hold
down the button and press the other button as well.
3. Release.the.[SHIFT].button.
4. To.save.this.setting,.hold.down.the.[SHIFT].button.
and.press.the.[WRITE].button.
Using a Foot Pedal
If you connect a pedal switch (DP series; sold separately)
to the FOOT PEDAL jack, you can hold down the pedal to
make notes continue sustaining even after you release the
keyboard.
Alternatively, you can use the pedal to apply numerous
other e ects.

Connecting a foot pedal

MEMO
Alternatively, you can connect an expression pedal
(EV-5) instead of a pedal switch (DP series).
NOTE
Use only the speci ed expression pedal (EV-5; sold
separately). By connecting any other expression pedals,
you risk causing malfunction and/or damage to the
unit.

Specifying the foot pedal assignment

Hold down the [SHIFT] button and press the [V-LINK]
button twice; the screen will indicate “PDL,” allowing you
to assign the e ect applied by the foot pedal.
You can assign the following functions to the pedal.
To save this setting, hold down the [SHIFT] button and
press the [WRITE] button.
Display Value Explanation
C01 CC01 ( MODULATION) Apply vibrato.
C05 CC05 ( PORTA TIME)
Control the portamento time over
which the pitch changes between
notes when playing with portamento.
C07 CC07 ( VOLUME) Control the volume.
C10 CC10 ( PAN) Control the panning.
C11 CC11 ( EXPRESSION) Control the expression.
C64 CC64 ( HOLD) Sustain the notes.
C65 CC65 ( PORTAMENTO) Smoothly connect the pitch from one
note to the next.
C66 CC66 ( SOSTENUTO) Sustain the notes that are currently
being held down.