8
Connecting Your Speakers
The Lucina AX-09 does not contain an amp or speakers.
In order to produce sound, you’ll need to connect the
rear panel OUTPUT jacks to an audio device such as an
ampli ed speaker system (subsequently referred to as
“speakers”), or use headphones.
Use audio cables (PCS series;
sold separately) to make
connections.
If you’re outputting in monaural, connect only the L/
MONO jack.
* To.prevent.malfunction.and/or.damage.to.speakers.or.
other.devices,.always.turn.down.the.volume,.and.turn.o..
the.power.on.all.devices.before.making.any.connections.
Connecting Your Headphones
Connect headphones to the rear panel PHONES jack.
You can connect headphones that
have a stereo mini (1/8”) plug.
Turning the Power On
* Once.the.connections.have.been.completed.(p..8),.turn.
on.power.to.your.various.devices.in.the.order.speci. ed..
By.turning.on.devices.in.the.wrong.order,.you.risk.
causing.malfunction.and/or.damage.to.speakers.and.
other.devices.
1. Minimize.the.volume.of.the.Lucina.AX-09.and.your.
speakers.
2. On.the.Lucina.AX-09’s.rear.panel,.turn.the.
.[POWER].switch.ON.
This unit is equipped with a protection
circuit. A brief interval (a few seconds)
after power up is required before the unit
will operate normally.
3. Turn.on.the.power.of.your.speakers.
4. Use.the..[VOLUME].knob.to.adjust.the.volume.
appropriately.
While you play the keyboard
to produce sound, slowly turn
the [VOLUME] knob toward the
right, and adjust the volume
on the Lucina AX-09 and on
your speakers.

Turning the Power O

1. Minimize.the.volume.of.the.Lucina.AX-09.and.your.
speakers.
2. Turn.o. .the.power.of.your.speakers.
3. Turn.the.Lucina.AX-09’s.[POWER].switch.OFF.