7
Deutsch Français Italiano Español Português NederlandsEnglish
Getting Ready

Connecting the AC Adaptor

The Lucina AX-09 can operate using the included AC
adaptor, or using Ni-MH AA rechargeable batteries.
1. Make.sure.that.the.Lucina.AX-09’s.power.is.turned.
o..(the.[POWER].switch.is.in.the.OFF.position).
2. Turn.the.[VOLUME].knob.all.the.way.to.the.left.
(minimum).
3. Connect.the.AC.adaptor.to.the.Lucina.AX-09’s.
rear.panel..DC.IN.jack,.and.then.plug.it.into.an.AC.
outlet.
Place the AC adaptor so
the side with the indicator
(see illustration) faces
upwards and the side with
textual information faces
downwards. The indicator
will light when you plug the
AC adaptor into an AC outlet.
To prevent the inadvertent disruption
of power to your unit (should the plug
be pulled out accidentally), and to avoid
applying undue stress to the DC IN jack,
anchor the power cord using the cord hook,
as shown in the illustration.

Attaching the Strap

Attach the strap to the
Lucina AX-09 as shown in the
illustrations below.
1. Attach.one.end.of.the.included.strap.to.the..strap.
pin.shown.in.the.illustration.below.
2. Attach.the.other.end.of.the.included.strap.to.one.
of.the.other.two.strap.pins.
A strap pin is provided in two locations; “A” and “B.” You
can use either one, whichever is more comfortable for you.
For a larger-bodied person, attaching the strap to pin “A”
will provide better stability.
A B
NOTE
If you use strap pin “B,” twist the strap as shown below.
If you attach the strap without twisting it, the strap may
come o of the Lucina AX-09.
Twist
Back of strap Front of strap