14
Display Value Explanation
C71 CC71 ( RESONANCE)
Control the resonance. Increasing
the resonance value will produce
a distinctive tonal character that is
typical of a synthesizer.
C72 CC72
( RELEASE TIME)
Control the time from note-o (when
the key is released) until the sound is
no longer heard (i.e., the release time).
C73 CC73
( ATTACK TIME)
Control the sharpness (attack speed)
with which the sound begins.
C74 CC74 ( CUTOFF)
Control the cuto . Higher values will
make the sound harder (brighter);
lower values will make the sound
softer (more mellow).
AFt AFTERTOUCH Apply the most suitable e ect for each
of the Lucina AX-09’s tones.
PUP PEDAL UP Select the tone of the next tone
number.
PDn PEDAL DOWN Select the tone of the preceding tone
number.
MEMO
With the factory settings, the foot pedal is assigned to
C64 (Hold).

If using a foot pedal not made by Roland

If you’re using a foot pedal that was made by a
manufacturer other than Roland, the pedal polarity might
be reversed, so that the operations that occur when you
press and release the pedal are the opposite of what you
expect. If so, hold down the [SHIFT] button and press the
[V-LINK] button three times to make the display indicate
“PoL.” Then use the [INC/+] / [DEC/–] buttons to make the
display indicate “rEu.”
To save this setting, hold down the [SHIFT] button and
press the [WRITE] button.
Value Explanation
Std.(Standard) Pedals made by Roland
rEu.(Reverse) Pedals with a polarity opposite to that
of Roland pedals
Preventing Tones from Changing During Performance ( Lock function)
You can lock the tone selected on the Lucina AX-09 to
prevent a di erent sound from being selected even if you
accidentally press a tone button while performing.
1. Hold.down.the..[LOCK].button.until.it.lights.
The Lock function will turn on; in this state, button
operations will not switch the tone.
To re-enable tone switching, hold down the button once
again until [LOCK] button goes out.
Playing Along with a Portable Audio Player
You can connect your portable audio player, and play the
Lucina AX-09 along with your favorite songs.
1. Connect.your.portable.audio.player.to.the.Lucina.
AX-09’s..EXT.IN.jack.
Use a stereo mini-plug
(1/8”) cable to connect
your player to the EXT
IN jack.
2. Play.back.a.song.on.your.portable.audio.player,.
and.play.along.on.the.Lucina.AX-09.
Use the controls of your player to adjust the volume and
select songs.
* When.connection.cables.with.resistors.are.used,.the.
volume.level.of.equipment.connected.to.the.inputs.(EXT.
IN).may.be.low..If.this.happens,.use.connection.cables.
that.do.not.contain.resistors.
Playing Along with an Audio File from USB Memory
The Lucina AX-09 can play back audio
 les (MP3, WAV, AIFF) that you’ve copied
to USB memory from your computer,
allowing you to play along with your
favorite songs.

Copying audio  les from your

computer to USB memory

You’ll need to copy the audio  les from your computer to
the root level of your USB memory.
MP3, WAV, AIFF
Copy.to.a.USB.drive