15
Deutsch Français Italiano Español Português NederlandsEnglish

Audio fi les that can be played

.MP3
Format MPEG-1 audio layer 3
Sampling.
Frequency 44.1 kHz
Bit.Rate 32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbps,
VBR (Variable Bit Rate)
.WAV,..AIFF
Sampling.
Frequency 44.1 kHz
Bit.Rate 8/16/24 -bit
Inser t the USB memor y
1. Insert.your.USB.memory.into.the..USB.MEMORY.
slot.as.shown.in.the.illustration.below.
NOTE
• Never insert or remove a USB memory while this unit’s
power is on. Doing so may corrupt the unit’s data or the
data on the USB memory.
• Carefully insert the USB memory all the way in—until it
is  rmly in place.
• Use USB memory sold by Roland. We cannot guarantee
operation if other products are used.
Play back audio  les
1. Insert.the.USB.memory.containing.the.copied.
audio..les.into.the.Lucina.AX-09’s.USB.MEMORY.
slot.
2. Press.the..[AUDIO.PLAYER].button.
The [AUDIO PLAYER] button will light and the [ ]
button will blink; now you can play back audio  les from
USB memory.
If you press the [AUDIO PLAYER] button once again, the
button will go out; now audio  les will not be played.
MEMO
The [ ] button will not blink if USB memory is not
inserted, or if the USB memory contains no song that
can be played.
3. Select.a.song.
When you hold down the [AUDIO PLAYER] button, the
display will show the  rst three characters of the  le name
of the currently selected audio  le.
Continue holding down the [AUDIO PLAYER] button, and
press the [INC/+] button to jump to the next song, or press
the [DEC/–] button to jump to the beginning of the song
(or the preceding song if you’re already at the beginning
of the song).
MEMO
The songs will be ordered by their  le name (in the
order of numerals, uppercase letters, and lowercase
letters).
4. Play.or.stop.the.song.
When you press the [ ] button, the button that was
blinking will light, and the selected audio  le will play.
If you press the [ ] button during playback, the lit
button will blink, and playback will stop.
If you press the [ ] button once again, playback will
resume from where it was stopped.
Switching songs during playback
During playback, you can hold down the [AUDIO PLAYER]
button and press the [DEC/–] button to interrupt playback
and return to the beginning of the current song. Similarly,
pressing the [INC/+] button will move to the beginning of
the next song, and resume playback.
MEMO
If you hold down the [AUDIO PLAYER] button and press
the [DEC/–] button at the beginning of the song, you’ll
return to the beginning of the preceding song.
Making Audio Player Settings
1. Hold.down.the.[SHIFT].button.and.press.the.
[AUDIO.PLAYER].button;.the.current.audio.player.
setting.will.blink.in.the.display.
2. Continue.holding.down.the.[SHIFT].button,.and.
press.the.[AUDIO.PLAYER].button.once.again.to.
switch.parameters.
After a brief interval, the value will appear; continue
holding down the [SHIFT] button, and use the [INC/+] /
[DEC/–] buttons to edit the value.
Parameter Value Explanation
LuL 0–127 Audio  le playback volume level

PLY 1P (SINGLE PLAY),

CP (CHAIN PLAY)
Choose whether playback will stop at
the end of the selected song (SINGLE
PLAY) or continue playing to the next
song (CHAIN PLAY).
3. To.save.this.setting,.hold.down.the.[SHIFT].button.
and.press.the.[WRITE].button.