15
3 Preparing the CX-24/12
1
2
3-4 Port Setting
The CX-24/12 automatically detects the port used for connection to the computer.
However, if cutting data is not sent correctly, check the communication parameters for the driver and use the display menu on the CX-24/
12 to make the same settings as for the driver.

Checking the Communication Parameters for the Port and Driver

- Windows 95/98/Me

Right-click on the icon for the driver of the model
you're using then click [Properties].
The [Roland CAMM-1 CX** **Properties] dialog
box appears.
For the CX-24:
[Roland CAMM-1 CX-24]
For the CX-12:
[Roland CAMM-1 CX-12]
The Properties dialog box for the model you’re using
appears.
Click [Start].
Point to [Settings] and click [Printers].
The [Printers] folder appears.
3
4
Make sure the port connected to the CX-24/12
appears under [Print to the following port].
When the connection uses a serial cable, click [Port
Settings].
The Properties dialog box for the connected port
appears.
Check the communication parameters for the driver.