71
14 Specifications
Driving method
Maximum cutting area
Acceptable media widths
Acceptable paper widths
Acceptable paper types
Tools
Max. cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Alignment accuracy for
printing and cutting when
loading printed material
Interface
Buffer size
Instruction system
Switches
Control switches
Display
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
*1 - The printer must be a laser or inkjet printer with a resolution of 720 dpi or higher.
- No lamination
- Excludes the effects of slanted movement and of expansion, contraction and warping of the material.
*2 CX-24 only
14 SpecificationsWidth: 584 mm (22-15/16 in.)
Length: 24,998 mm (984-1/8 in.)
50 to 700 mm (1-15/16 to 27-1/2 in.)
50 to 700 mm (1-15/16 to 27-1/2 in.)
Media-movement method Stepping motor (Micro-step)
Width: 280 mm (11 in.)
Length: 24,998 mm (984-1/8 in.)
50 to 395 mm (1-15/16 to 15-1/2 in.)
50 mm to 395 mm (1-15/16 to 15-1/2 in.)
High-quality paper
Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, and Thick water-based fiber-tipped pens (options)
During cutting: 400 mm/sec. (15-11/16 in./sec.) (45-degree direction)
(when [HEAVY] is selected on the display menu: 100 mm/sec. (3-7/8 in./sec.))
30 to 200 gf
0.05 mm/step (0.00197 in./step)
0.025 mm/step (0.000984 in./step)
Error of less than +/- 0.2% of distance traveled, or 0.1 mm (0.00394 in.), whichever is grater
0.1 mm (0.00394 in.) or less (Excluding stretching/contraction of the material,
and provided that material length is under 1600 mm (62-15/16 in.))
±3 mm (0.12 in.) or less with 500 mm (19-5/8 in.) or less of movement distance in the material-feed
direction
(Excluding the affects of program accuracy and printer accuracy) *1
Parallel (Centronics compatible), Serial (RS-232C)
1 Mbyte (800 Kbyte for replot buffer)
CAMM-GLIII (mode1 and mode2)
Power switch
Dial, TEST, ORIGIN, , , , , ENTER, MENU/PARAM
Liquid crystal display unit: 16-character by 1 line
Maximum: 0.9 A /100 to 240 V ± 10 % 50/60 Hz
[Cutting mode] : less than 70 dB (A) [Standby mode] : less than 40 dB (A)
(According to ISO 7779)
850 mm (W) x 300 mm (D) x 240 mm (H)
(33-1/2 in. (W) x 11-13/16 in. (D) x 9-1/2 in. (H))
14 kg (30.9 lb.)
545 mm (W) x 300 mm (D) x 240 mm (H)
(21-1/2 in. (W) x 11-13/16 in. (D) x 9-1/2 in. (H))
10 kg (22 lb.)
5 to 40°C (41 to 104°F)
35 to 80% (non-condensing)
Power Cord x 1, Blade x 1, Blade Holder XD-CH3 (Cutter holder and pin) x 1, Startup Manual x
1, To Ensure Safe Use x1, Roland Software Package CD-ROM x 1, Roller base x 1*2
CX-24 CX-12