![](/images/new-backgrounds/1294134/29413441x1.webp)
Connecting to Audio Equipment
Read this chapter if you wish to connect the
By connecting the
NOTE
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
About the Jacks
R | L (Mono) | R | L (Mono) |
■Listening to the
Input R/L
Out MIDI In
Output Jacks
InputOutput
(Line In, Aux In)
Use audio cables (sold separately) to connect the
R | L (Mono) | R | L (Mono) |
can be recorded on a cassette tape or other recording media.
Out MIDI In
InputOutput
Input Jacks
You can use audio cables (sold separately) to connect another audio producing device to the
1.Turn on the power to the
2.Turn on the power to the connected equipment.
3.Adjust the volume.
Making the Connections
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
1.Turn the volume down completely on all equipment.
2.Turn off the
3.Use audio cables (sold separately) to connect the other device to the
NOTE
If the device you are connecting is monaural, connect it to the
Recording procedure
1.Connect the
2.Start recording on the connected audio device.
3.Begin playing on the
4.When you finish playing, stop recording.
■Listening to the sound of an audio device through the speakers of the
Output R/L
(Line Out)
R | L (Mono) | R | L (Mono) |
L (Mono) jack. In this case, do not connect the R jack of the F-
Out MIDI In
InputOutput
90.
NOTE
Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.
Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
1.Turn on the power to the connected equipment.
2.Turn on the power to the
3.Adjust the volume.
NOTE
If the volume of any device connected to the Input jacks is raised too high, you not only risk causing damage to your hearing, you could also damage the unit’s speakers. It’s best to always keep the sound within reasonable levels of volume.
21