Roland owner manual Assembling the F-90, Check the Parts, Assembly Procedure, Introduction

Introduction

Assembling the F-90

Make sure that another person is on hand to help with the assembly and setup.

To move the piano, lift it carefully—all the while keeping it level. Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your hands or feet.

Always carry out this procedure with the F-90 lying horizontally, with the rear panel facing down.

■Check the Parts

Before you begin assembling the stand, check that all the parts were supplied.

You will also need to have a Phillips screwdriver.

1F-90

2Speaker box

Speaker cable

3Side panel right and left

Front

(Left)

Rear

Cross section

Front

(Right)

	Rear
4 Screws x 8	5 Cap x 8
	(and some spare caps)

The speaker box can also be installed so that it faces toward the rear instead of toward the front. Having the speaker box face out the rear of the instrument allows the speakers to be directed toward listeners when the back of the instrument faces the audience.

Normal direction		When facing to the rear
Front	Rear	Front	Rear

■Assembly Procedure

•At first, assemble the entire stand in a temporary fashion, without really tightening the screws.

Then, after checking the overall alignment of the boards (and gently shifting certain parts where necessary), go around and tightly fasten each of the screws.

•Be careful when assembling the F-90, so as to avoid scratching the side panels.

When securing the screws, lay the entire unit sideways with the rear side of the F-90 at the bottom.

1.Tighten the screws on one of the side panels to secure that side panel the F-90 and speaker box (four screws).

Install so that the speaker cable at the rear of the speaker box extends to the right side (the side where the F-90’s [Power] Switch is located).

	F-90
Screws
	Speaker box
Side with
rounded	Side panel
corners
facing out	(Left)

2.Tighten the screws on the other side panel to secure it the F-90 and speaker box (four screws).

F-90

	Screws
	Side panel
Speaker box	(Right)

Side with rounded corners facing out

Speaker

box

Speaker

box

6