42

Performance Functions and Effects

The GW-8 contains built-in reverb, chorus, and multi-effect
(MFX) processors. You can choose an effect type for each
processor.

MFX will apply only to the realtime performance of the part
you play by hand (the Upper Part or Lower Part). Be aware
that MFX will not apply to recorded song data.
1.
Press [EFFECTS].
The Effect setting screen will appear.
2.
Use [ ] [ ] to select a page, and use [ ] [ ] to
select the parameter that you want to edit.

3.

Turn the VALUE dial to edit the value.

4.

When you’re finished editing the effect settings, press
[EFFECTS] or [EXIT].
The Main screen will appear.

Effect Parameters

Using Effects ([EFFECTS])

Editing the Effects

Page
Parameter
Explanation Value
EFFECT
SEND
Upper
MFX
Chorus
Send

Specifies the amount of
chorus that will be
applied to the sound of
the Upper Part that has
passed through MFX. Set
this to “0” if you don’t
want to apply chorus.
0–127

Upper
MFX
Reverb
Send

Specifies the amount of
reverb that will be
applied to the sound of
the Upper Part that has
passed through MFX. Set
this to “0” if you don’t
want to apply reverb.
0–127

Lower
MFX
Chorus
Send

Specifies the amount of
chorus that will be
applied to the sound of
the Lower Part that has
passed through MFX. Set
this to “0” if you don’t
want to apply chorus.
0–127

EFFECT
SEND
Lower
MFX
Reverb
Send

Specifies the amount of
reverb that will be
applied to the sound of
the Lower Part that has
passed through MFX. Set
this to “0” if you don’t
want to apply reverb.
0–127

Chorus
Output
Select

Specifies how the sound
routed through chorus
will be output.
MAIN
: Output to the
OUTPUT jacks in stereo.

REV

: Output to reverb in
mono.

M+R

: Output to the
OUTPUT jacks in stereo,
and to reverb in mono.
MAIN,
REV,
M+R

LOWER
MFX

See “Multi-Effects Parameters” (p. 56)

UPPER
MFX

CHORUS

See “Chorus Parameters” (p. 82)

REVERB

See “Reverb Parameters” (p. 83)

EFFECT

SOURCE

Upper
MFX
Source

Specifies the MFX
settings that will be used
for the Upper Part.
If you choose
“PERFORM,” the MFX
settings of the
Performance will be
used. If you choose
“UPPER TONE,” the
Upper MFX settings of
the Tone will be used.

PERFORM,

UPPER
TONE

Lower
MFX
Source

Specifies the MFX
settings that will be used
for the Lower Part.
If you choose
“PERFORM,” the MFX
settings of the
Performance will be
used. If you choose
“LOWER TONE,” the
Lower MFX settings of
the Tone will be used.

PERFORM,

LOWER
TONE

Page
Parameter
Explanation Value
GW-8_e.book 42 ページ 2008年4月1日 火曜日 午前11時44分