Roland KF-90 owner manual Exchanging Parts, Correcting Notes One by One, 130

Chapter 6 Editing Functions

Exchanging Parts

You can exchange the notes recorded for a particular part with the notes recorded for another part.

This process of swapping parts is called “Part Exchange.”

1.Follow the steps in “Choosing an Editing Function” (p. 124) to choose <Part Exchange>.

The following screen will appear.

2.Touch each to choose Parts you want to exchange.

If you want to cancel the Part exchange, touch <Exit>. The part-exchanging is canceled, then you are returned to the Song Edit screen.

3.When you’re done making all the settings, touch <Execute>.

When the part-exchanging process is finished, you are returned to the Song Edit screen.

Correcting Notes One by One

You can make corrections in a recorded performance one note at a time. This process of making changes in individual notes is called “Note Editing.”

●You can make the corrections described below by using Note Editing.

•Deleting misplayed notes

•Changing the scale of a single note

•Changing the key velocity of a single note

1.Follow the steps in “Choosing an Editing Function” (p. 124) to choose <Note Edit>.

The following screen will appear.

Location Pitch Velocity

The note-location display uses “Measure: Beat: Tick” as the format. A tick is a unit of time that’s shorter than a beat.

2.Touch Part < > and < > to choose the Part that contains the note you want to change.

The Part number appears at the top of the screen.

3.Press the Bwd [ ] and Fwd [ ] buttons or

touch on the screen to find the note you want to correct.

Once you touch <Event>, then you can also search the note by the dial.

4.When you’ve found the note you want to correct, touch <Pitch> or <Velocity> for the note.

5.Use the dial or the Value [-] [+] buttons to correct the pitch or velocity. If you want to delete the note, touch <Delete>.

6.When you’re done making all the settings, touch <Exit>.

You are returned to the Song Edit screen.

130