Roland KF-90 Saving a User Style, Saving on the Floppy Disk, Saving on the Disk/User button, 137

Chapter 7 Using Other Functions

Saving a User Style

You can save a User Style you’ve created on a floppy disk or the [Disk/User] button (the KF-90’s internal memory). When you save a User Style to the [Disk/User] button, the style doesn’t disappear even when you switch off the power. You can choose the saved User Style by pressing the [Disk/ User] button. You can save up to 3 User Styles on the [Disk/ User] button.

6.After you’ve enter the style name, use to choose the destination for saving it.

*If you select a location where a User Style has already been saved, the previously saved User Style is erased and the new one is saved.

Touching <Exit> takes you back to the previous screen without saving the User Style.

■ Saving on the Floppy Disk	7.	Touch <Save> on the screen.
1. Insert a floppy disk into the disk drive.		The saving process starts.
	*	Don’t take the floppy disk out of the disk drive until the saving
→ Refer to “Inserting and Ejecting a Floppy Disk” (p. 39).		process is finished.

2.Press the [Disk/User] button.

The Disk/User screen will appear.

fig.07-08.e

3.Touch <Disk>.

4.Touch <Save>.

The following screen is called up.

fig.07-09.e

■Saving on the [Disk/User] button

1.Press the [Disk/User] button.

The Disk/User screen will appear.

2.Touch <Memorize>.

5.Touch to scroll the cursor sideways, and enter the name of the style by using the Value [-]

[+] buttons or the dial to choose the letters.

Touch <A-a-0-!> at the bottom of the screen to change the type of script.

Each touch of <A-a-0-!> cycles the type of characters through “English (upper case),” “English (lower case),” “numerals,” “symbols,” then back to “English (upper case).”

To delete the character under the cursor, touch <_>.

3.Enter the name of the style and choose the destination for saving it following the step 5 and 6 described in “Saving on the Floppy Disk.”

4.Touch <Execute>.

The User style is stored on the KF-90’s [Disk/User] button.

*Never try to switch off the power while this operation is in progress. Doing so may damage the internal memory, making it impossible to use this instrument.

→You can return the settings stored on the [Disk/User] button to the product’s factory defaults. Check out “Restoring the Factory Settings (Factory Reset)” (p. 154).

*Attempting to save a User Style containing a lot of performance data to the [Disk/User] button may cause another User Style to be erased.

Chapter 7

137