Roland KF-90 owner manual 114

Chapter 4 Recording and Saving the Performance

Changing the Order of Songs on Floppy Disk

Here’s how you can change the order of songs saved on a floppy disk.

1.	Have ready an empty, formatted floppy disk.				For more about formatting,
					take a look at “Formatting
2.	Insert the floppy disk containing the saved songs into the				Floppy Disks (Format)” (p.
					109).
	disk drive.
3.	Press the [Song/Disk] button.
4.	Use the touch screen or Page <		> and <	> to select the
	song to which you would like to assign song number one.
5.	After you’ve chosen a song, touch <Exit> several times.
	Display the screen where the measure number appears in the top-right area
	of the screen.
6.	Press the Play [ ] button.				NOTE
					The measure number of the
	The measure number on the screen appears in reverse video.
					screen appears in reverse
7.					video while the KF-90
	When the measure number display returns to its original				reads the song data from
	appearance, press the Stop [	] button.			floppy disk. Don’t take the
8.					floppy disk out of the drive
	Take the floppy disk out of the disk drive.				until the display returns to
					its original state.
9.
	Insert a blank floppy disk.
10.	Save the song in the usual way (p. 109).				NOTE
	Repeat these steps to save the song you want to have song number 2, the				Some commercially
	song you want to have song number 3, and so on to the blank floppy disk in				available music files cannot
	the desired song sequence.				be saved because they are
					copyrighted.

114