Roland KF-90 owner manual Basic Screen, Using the Main Icons

Before You Play

■Basic Screen

The following screen is called “Basic Screen.”

You can usually display this screen by touching <Exit> in the display several times.

If touching <Exit> doesn’t display this screen, follow either of the procedures described below to display it.

•Press the One Touch Program [Arranger] button.

The basic screen appears and displays the settings for Automatic Accompaniment.

•Hold down the One Touch Program [Piano] button and press any one of the Tone Select buttons, then touch <Exit>.

fig.00-11

Tempo 1 Beat Measure

Tone Part

Name

2

3

4

1Such as the name of the song and Music Style appears.

2The Tone names are selected appear.

Information about the Automatic Accompaniment, such as the form of

3	each of the chords as they are played and icons are shown in the dis-
	play. Information about the manner in which the chords are played is
	not displayed when Automatic Accompaniment is not being used.
4	The on-screen graphics that appear three dimensional work like but-
	tons. These are called “Icons.”

Using the Main Icons

With the KF-90, you can many other screens besides the basic screen to do things. The main icons you can use on these screens are as follows.

Some screens consist on two or more pages.

You can display the next page or the previous page of the screen by touching Page < > or < >.

Touch this to exit the screen that is currently displayed.

You can usually display the Basic screen by touching <Exit> sev- eral times.

*You can adjust the contrast of the screen. Check out “Adjusting the Contrast of the Screen” (p. 153).

*The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not always match what appears in the manual.

Before You Play

19