Roland KR-17 Turning Off the Beat Indicator, 164, Image data that KR can display, Size, Format

Chapter 9 Various Settings

3.Touch the name of the stored image data.

When you touch <Preview>, you can then show the selected image data on the display selected in Step 1.

4.Touch <Save>.

The selected image data is stored.

5.Touch <Exit> to return to the previous screen. To clear the stored image data, touch <Erase>.

❍Image data that KR can display

Size	320 x 240 pixels (for KR display)
	640 x 480 pixels (for external display)
Color	1/4/8 bit (2/16/256 colors)
	BMP format
Format	* The KR cannot deal with compressed
	image data.
	1–8 characters in length (lowercase is ok). A
	filename extension of “.BMP” (uppercase
	characters) must be added after the name.
	The following characters can be used to
	name an image.
Name	A B C D E F G H I J K L M N O P Q R S T U
	V W X Y Z a b c d e f g h i j k l m n o p q r s
	t u v w x y z 0 1 2 3 4 5 6 7 8 9 # $ % & ‘ ( ) -
	@ ~ { } ^ _ !
	* If you use a character that cannot be used
	in a name, it will be replaced by another
	character when displayed.

■Turning Off the Beat Indicator

(Beat Indicator)

The beat indicator normally flashes in time with the metronome, Music Style, or song tempo. However, if you wish, it can be set to remain off at all times.

At step 3 in “Procedure” (p. 161), touch <Beat Indicator>.

A screen like the one shown below appears.

Touch to turn the setting ON, or OFF (so the beat indicator remains off).

■Remembering the Settings Even When the Power is

Turned Off (Memory Backup)

Normally, the various settings revert to their default values when the power is turned off. However, you can specify that the settings will be remembered even when the power is turned off. This function is called “Memory Backup.”

→For more on the settings stored using Memory Backup, refer to “Parameters Stored in Memory Backup” (p. 200).

At step 3 in “Procedure” (p. 161), touch <Memory Backup>. A screen like the one shown below appears.

Chapter 9

Touch <Execute>.

The confirmation message appears on screen.

Touch <OK> to store the setting.

When the setting has been stored in memory, the previous screen will reappear.

* Never turn off the power while the display indicates <Executing...>. Doing so will damage the KR’s internal memory, making it unusable.

164