Chapter 1 Performance

Broadening the Reverb Sound

1.Connect amp or external speaker to the Aux jack.

2.Press the [Surround] button and watch the indicator light up (p. 35).

3.Touch <Surround Reverb>.

The following “Surround Reverb screen” appears.

The reverb sounds from the external speaker and the KR’s internal speaker. When you touch <Exit>, the Surround effect is activated, and you return to the previous screen.

Cancelling the Effect

4. Press the [Surround] button and watch the light go out.

The Surround effect is eliminated, and the effect is no longer applied to any of the parts.

Changing the Amount of Surround Reverb

1.Press the [Surround] button and watch the indicator light up.

2.Touch <Surround Reverb> to display the Surround Reverb screen.

3.Touch <Options>.

4.Touch the “External” and “Internal” sliders to adjust the volume levels of the external speaker and the KR’s speaker.

The Surround Reverb volume is adjusted.

When you touch <Exit>, you return to the Surround screen.

NOTE

You cannot use both “Surround Accomp” and “Advanced 3D” simultaneously with “Surround Reverb.” When “Surround Accomp” is on, the reverb sound is broadened as well.

You can use the Memory Backup function to store these settings to the KR (p. 164).

Chapter 1

37

Page 37
Image 37
Roland KR-15, KR-17 owner manual Broadening the Reverb Sound, Changing the Amount of Surround Reverb