Roland KR-17, KR-15 owner manual User Program Registration, Saving Performance Settings, 122

Chapter 6

Chapter 6 User Program Registration

Saving Performance Settings	Determining the name of the User Programs
(User Program)	4.	Touch <Rename>.
Any collection of settings, including those describing the		A “Rename screen” like the following appears.
current status of your data selections or settings Automatic
Accompaniment, can be saved to the [User Program] button.
You can then call up the stored settings by pressing the [User
Program] button. Saving your preferred combinations of
Music Styles and Tones, as well as other frequently used
settings, makes it more convenient.
You can register up to 36 User Programs to the KR.
		When you touch	, the cursor moves.
		When you touch the icon for the character to be input,
		the character appears of the cursor potion.
		For example, touching the <ABC> icon in succession
→ For more on what can be registered to a User Program, refer to		cycles you through the available choices in that character
		group (A→B→C→A...).
“Parameters Stored in the User Program” (p. 200).
1. Set the Music Style, Tone, and other data until the		Each touch of <A-a-0-!> cycles the type of characters
		through “English (upper case),” “English (lower case),”
settings are the way you want them.
		“numerals,” “symbols,” then back to “English (upper
2. Press the [User Program] button.		case).”
A “User Program screen” like the one shown below		When you touch <Del>, the character at the cursor
		position is deleted.
appears.
		When you touch <Ins>, a space is inserted at the cursor
		position.
	5.	When you have finished with the name, touch <Exit>.
		You’re returned to the Write User Program screen.
	Determining the write destination
	6.	Touch	to select the write-destination
		number.
3. Touch <Write>.	7.	Touch <Write>.
		The confirmation message appears.
A “Write User Program screen” like the following
	8.	Touch <OK>.
appears.
		The current performance settings are saved to the [User
		Program] button.
	*	Never turn off the power while the display indicates
		<Writing...>. Doing so will damage the KR’s internal
		memory, making it unusable.
	→ You can restore the content registered to the [User Program]
		button to the original factory settings. Refer to “Restoring the
		Factory Settings (Factory Reset)” (p. 165).

122