Chapter 10 Connecting External Devices

Chapter 10

MIDI Settings

You can make MIDI settings like those described below.

“MIDI Setting Screen”

Display

Explanation

 

 

 

 

 

 

 

 

 

 

 

Tx Channel

Chooses the MIDI send channel

 

(p. 174).

 

 

 

 

 

 

 

 

 

Local Control

Switches Local Control on or off

 

(p. 174).

 

 

 

 

 

 

 

 

 

“Program Change Screen”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display

Explanation

 

 

 

 

Bank Select MSB

Sends Bank Select MSB messages

(p. 175).

 

 

 

Bank Select LSB

Sends Bank Select LSB messages

(p. 175).

 

 

 

Program Change

Sends Program Change messages

(Program Numbers) (p. 175).

 

 

 

Making the Settings

1.Switch to the Basic screen, or press the One Touch Program [Piano] button.

2.Touch <Functions>.

3.Touch <MIDI Setting> or <Program Change>.

4.Touch to make the setting for each item.

Touch <Exit> to return to the Functions screen.

Selecting the Transmit Channel

(Tx Channel)

MIDI organizes things into “channels,” which are numbered from 1 through 16. Simply connecting a cable is not enough for communication to take place. The connected devices must be set to use the same MIDI channels. Otherwise, no sound will be produced, and no sounds can be selected.

Select the transmit channel (1–16) of the KR.

The channel setting is at “1” when the KR is powered up.

If the keyboard has been split into right-hand and left-hand sections, messages from the left-hand section are fixed at “3.”

The KR receives messages on all channels from 1 through 16.

Disconnecting the Internal Sound Generator and

Keyboard (Local Control)

When connecting a MIDI sequencer, set Local Control to “OFF.” The setting is at “Local Control ON” when the KR is powered up.

As illustrated, information describing what has been played on the keyboard is passed to the sound module over two different routes, (1) and (2). As a result, you hear overlapping or intermittent sounds. To prevent this from happening, route (1) must be disabled, by setting the unit to what is known as “Local Off.”

(1)Local On

 

 

Sequencer

Sound

MIDI

MIDI

IN

OUT

Generator

 

Memory

 

 

 

MIDI

MIDI

 

OUT

IN

(2) Soft Tru On

Each note played is sounded twice

174

Page 174
Image 174
Roland KR-17, KR-15 Midi Settings, Selecting the Transmit Channel Tx Channel, 174, Touch to make the setting for each item