![](/images/new-backgrounds/1191719/19171917x1.webp)
3 PART NAMES AND FUNCTIONS
• Front View
Stationary Pinch Roller
During cutting, this roller holds the sheet down so that it is in contact with the grit roller.
Guide Lines
Align the sheet with these lines when loading.
Grit Roller
Grasps and moves the sheet during cutting.
Platen
The sheet is moved over the platen during the cutting process.
Movable Pinch Roller
During cutting, this roller holds the sheet down so that it is in contact with the grit roller. It can easily be slid to the right or left, and should be positioned to suit the width of the sheet being used.
Tool Carriage
The tool carriage is where the blade holder is mounted. The tool carriage performs the cutting by moving the tool left/right or up/down.
DIP Switches
Used to make various settings.
Serial (RS-232C)
Input Connector
In a serial configuration, this connector is where you need to connect the serial cable that is used to communicate with your computer.
Parallel (Centronics) Input Connector
In a parallel configuration, this connector is where you need to connect the parallel cable that is used to communicate with your computer.
Pen Force Control Slider
Sets the blade force to be used with the tool.
Operation Panel
These are keys for making settings for the various functions.
• Rear View
Sheet Loading Lever
Used to raise or lower the pinch rollers when loading or unloading a sheet.
Power Switch
When pushed toward [I], power is turned on.
Push toward [O] to turn it off.
Power Connector (AC IN)
This jack accepts connection of the power cord.
3