Try Recording Your Performance

5.

fig.6-05.e

6.

fig.6-06

7.

fig.6-07.e

Press the [ (REC) ] button to turn on the indicator.

The keyboard is put in record standby mode.

The [ (PLAY) ] button’s indicator flashes.

Press

Lit

If you want to cancel the recording, then press the [ (REC) ] button once more to make the indicator dark.

If you wish to stop the metronome, press the Metronome [ (ON/OFF) ] button to make the indicator go dark.

In the beginning it is probably a good idea to listen to the metronome as you record. The sound of the metronome is not recorded.

Recording will begin when you play a note on the keyboard.

The [ (PLAY) ] button indicator will change from blinking to lit.

Instead of playing the keyboard, you can also begin recording by pressing [ (PLAY) ] button to make the indicator light. In this case, you will hear a two-measure count before recording begins.

Listen to the metronome, and play along with the tempo.

When you are finished recording, press the [ (PLAY) ] button to make the indicator go dark.

Press

Dark

You can use a MIDI sequencer to save the recorded performance. Please refer to “Transmitting Performance Data from MIDI Out” (p. 35).

23

Page 23
Image 23
Roland pt-2700 Press the REC button to turn on the indicator, Recording will begin when you play a note on the keyboard