18
Getting Ready
1.

Before you begin making connections, confirm the following.

Is the volume level of the RD-300GX or connected amp turned all the way down?
Is the power to the RD-300GX or connected amp turned off?
2.

Connect supplied AC adaptor to the DC IN of the RD-300GX, and plug the other end into

an AC outlet.

3.

Connect the RD-300GX and external devices.

Use audio cables to connect audio equipment, such as an amp or speakers.
Use MIDI cables to connect MIDI devices. Use USB cables to connect computer.
If you are using headphones, plug them into the PHONES jack.
Connect pedal switches or expression pedals as necessary.
Use Stereo headphones.
Use only the specified expression pedal (EV-5/7; sold separately). By connecting any other
expression pedal, you risk causing malfunction and/or damage to the unit.
You can connect a floppy disk drive (sold separately) or a commercially available CD drive to
the USB MEMORY connector (p. 14). You can use a floppy disk drive or CD drive to play back
songs from a floppy disk or CD.

Connect the pedal included with the RD-300GX to one of the PEDAL jacks.

When connected to the DAMPER jack, the pedal can be used as a damper pedal.

Connecting the pedal to the CONTROL jack allows you to assign a variety of functions to the

pedal (p. 68).

Set the switch on the included pedal to “Continuous” when the pedal is connected.
Connecting Pedals
NOTE
NOTE
NOTE
NOTE
RD-300GX_e.book 18 ページ ２００８年２月１４日　木曜日　午後１時２６分