59
Using the RD-300GX As a Master Keyboard
Set the keyboard range in which each Zone will sound.
This can be used to make notes in different areas of the
keyboard play different Tones.
Specify the lower limit (KRL) and upper limit (KRU) of the key
range being set.
You can also set this by pressing a specific key and then
pressing the [ENTER] button.
This is effective only when the [SPLIT] button is on
(p. 29) in the key range settings.
“FUL” is displayed when the [SPLIT] button is set to
OFF. In this case, the [SPLIT] button is
automatically switched on when the value is
changed to something other than “FUL” with the
[DEC] [INC] buttons.
You cannot set the key range’s lower limit higher
than the upper limit, nor can you set the upper limit
below the lower limit.
If you don’t want MIDI note data to be transmitted,
set the Zone’s MIDI OUT Ch to “OFF.” (p. 55)
Setting the Key Range (KRL/KRU) Parameter Value
KRL (Key Range Lower)
A0–C8
KRU (Key Range Upper)
NOTE
NOTE
RD-300GX_e.book 59 ページ ２００８年２月１４日 木曜日 午後１時２６分