12
Panel Descriptions
1.
[S1] Button, [S2] Button
You can assign various functions to these buttons (p. 68).
While performing, you can press these buttons to use the
assigned functions.
Pitch Bend/Modulation Lever
This allows you to control pitch bend or apply vibrato (p. 34).
2.
VOLUME Slider
Adjusts the overall volume that is output from the rear panel
OUTPUT jacks, and PHONES jack (p. 20).
3.
EQUALIZER/EFFECTS
[LOW] Knob
Adjusts the sound’s low-frequency range (p. 36).
[HIGH] Knob
Adjusts the sound’s high-frequency range (p. 36).
[SOUND CONTROL]
Button
Switching this on will reduce inconsistencies in the volume,
and produce a more stable, consistent sound (p. 35).
Switching this on lets you control external V-LINK
compatible video equipment connected to the RD-300GX
(p. 82).
[REVERB] Button
Switches the reverb on/off (p. 33).
[MULTI EFFECTS] Button
Switches the multi-effects on/off (p. 47).
4.
ZONE LEVEL/CONTROL
ZONE LEVEL Sliders
Adjust the volume level for each Zone (p. 31).
If the “EXTERNAL” indicator is lit, these sliders control the
volume of an external MIDI sound module (p. 57).
[EXTERNAL/INTERNAL] Button
Puts the RD-300GX in control of the external MIDI sound
generator (p. 55).
[TRANSPOSE] Button
Sets the range of the keyboard to transposed (p. 32).
[SPLIT] Button
This button selects “Split mode,” whereby the keyboard is
divided into two regions, allowing you to play separate
sounds with the right and left hands (p. 29).
In addition, you can listen to the demo songs by
simultaneously pressing this button and the [DUAL] button
(p. 25).
[DUAL] Button
Switches the RD-300GX to “Dual mode,” which enables
performances with two separate Tones layered together (p.
28).
In addition, you can listen to the demo songs by
simultaneously pressing this button and the [SPLIT] button (p.
25).
2
1
34
Front Pane
l
RD-300GX_e.book 12 ページ ２００８年２月１４日 木曜日 午後１時２６分