77
Detailed Settings for Each Function ([EDIT] Button)
Utility includes functions for sending data to external MIDI
sequencers and other devices and for restoring the settings to
their original factory state.
For more on “Rec Mode” and “Local Control” in
Utility menu, refer to “Settings for Recording (Rec
Mode/Local Control)” (p. 78).
You can transfer the contents of a Setup to an external MIDI
device. This operation is called “bulk dump.”
The RD-300GX lets you send the contents of the currently
selected Setup to an external MIDI device. This is convenient
when you’re recording a song.
1.
Use a MIDI cable (optional) to connect the RD-
300GX’s MIDI OUT connector to the MIDI IN
connector on an external sequencer.
2.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
3.
Press the [INC] button to select “Utility,” then
press the [ENTER] button.
4.
Use the [DEC] [INC] buttons to select “Bulk
Dump,” then press the [ENTER] button.
The following screen appears.
fig.disp
5.
Put the external sequencer in record mode.
6.
Press the [ENTER] button to transmit the settings.
The message “Executing...” appears in the display
during transmission of the data.
7.
After the transmitting is finished, the display
will indicate “Completed.”
You are returned to the Edit screen.
8.
Stop the external sequencer.
The settings stored in the RD-300GX can be returned to their
factory settings.
Executing “Factory Reset All” results in deletion of
the Setups (p. 50). If you want to keep the
recorded content, save the Setup file to your USB
memory (p. 72).
When making USB connections, be absolutely sure
to disconnect the USB cable before starting.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Press the [INC] button to select “Utility,” then
press the [ENTER] button.
3.
Use the [DEC] [INC] buttons to select “Fctry
Reset Cur” or “Fctry Reset All,” then press the
[ENTER] button.
The following screen appears.
fig.disp
To cancel the Factory Reset, press the [EXIT/SHIFT]
button.
4.
Press the [ENTER] button once again to start
the Factory Reset operation.
“Executing...” appears in the display while the
Factory Reset is in progress. Be sure never to turn
off the power.
After the Factory Reset operation is finished, The Utility
screen returns to the display.
While the Factory Reset is in progress, no sounds
are produced even when the keys are pressed. In
addition, song, and Rhythms being played are
also stopped.
Utility Settings (Utility)
Transferring the RD-300GX’s Settings
to an External MIDI Device
(Bulk Dump)
Currently
selected
Setup name
Restoring the Settings to the Factory
Condition (Factory Reset)
Parameter Description
Fctry Reset
Cur
The currently selected Setup returned to their
factory settings.
Fctry Reset
All
The settings stored in the RD-300GX can be
returned to their factory settings.
NOTE
NOTE
NOTE
NOTE
RD-300GX_e.book 77 ページ ２００８年２月１４日　木曜日　午後１時２６分