47
Using the Convenient Functions in Performances
In addition to reverb (p. 33), the RD-300GX also allows you to apply “multi effects” to
sounds. Multi effects provides a collection of 78 different effects, such as distortion and
rotary, from which you can choose.
The factory settings have a suitable effect assigned to each of the Tones.
fig.Q2-10p
1.
Press the [MULTI EFFECTS] button, getting its indicator to light.
Try fingering the keyboard.
The effect is applied to the currently selected Tone.
2.
To remove the effect, press the [MULTI EFFECTS] button once more, extinguishing the
indicator.
Effects may not be applied with some of sounds.
If the effect applied to the Tone of each Zone differs when you’re using Dual mode or
Split mode, you can specify the Zone to which the effect will be applied. For details,
refer to “Setting the Zone to which Multi Effects are Added (MFX Zone)” (p. 68).
You can change the levels of depth for the effect.
The content and range vary according to the MFX type. For more detailed information,
refer to “Effect List” (p. 87).
1.
While holding down the [MULTI EFFECTS] button, use the [DEC] [INC] buttons to adjust
the effect depth.
The screen will show the effect that is applied to the currently selected Tone and the parameters
that can be edited.
The next time you choose the same Tone, the effect with the depth you’ve selected here is applied.
You can change the effect type. Refer to “Changing the Multi-effects Type” (p. 48).
Applying Effects to the Sound ([MULTI EFFECTS] Button)
Changing the Depth of Effect
RD-300GX_e.book 47 ページ ２００８年２月１４日 木曜日 午後１時２６分