86
Error Messages/Other Messages
Error Messages
Other Messages
Indication Situation Action
Error 02
File Error
An error occurred during writing. The
external media’s protect tab may be in the
“Protect” (writing prohibited) position, or
the external media may not yet be
initialized.
- - -
Error 10
No Storage Media
No external media is inserted. Insert the external media and try again.
Error 11
File Error
There is not sufficient free memory in the
save destination.
Delete unneeded files (Songs or Setup files) you’ve saved in
internal or external memory and try again.
Error 14
File Error
An error occurred during writing.
The external media may be corrupted.
Insert other external media and try again.
Alternatively, you can initialize the external media.
Error 15
File Error
The file is unreadable. The data format is
not compatible with the RD-300GX.
Only files in the following formats can be used.
• Setup files with an extension of “RDS”
• SMF music files with an extension of “MID”
• Audio files with an extension of “WAV,” “AIF,” or “MP3”
For details on audio file formats, refer to “Song Data Not
Played Back Correctly” (p. 85)
Error 16
File Error
Data was not called up in time for playback
of the song.
You may be able to play the song after waiting a few
seconds.
Error 18
File Error
This audio format is not supported. Please use 44.1 kHz 16-bit linear WAV/AIFF format audio
file or MP3.
Error 30
File Error
The internal memory capacity of the RD-
300GX is full.
You can’t fast-forward or rewind the song.
Only playback is possible.
Error 40
MIDI Buffer Full
Due to an inordinate volume of MIDI
messages received, the RD-300GX has
failed to process them properly.
Reduce the amount of MIDI messages to be transmitted.
Error 41
MIDI Commu Error
A MIDI cable has been disconnected. Connect it properly and securely.
Error 43
MIDI Commu Error
A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
Error 51
System Error
There may be a problem with the system. Turn on the power once again, then repeat the procedure.
Error 65
USB Over Current
The USB memory port was subjected to
excessive current.
Make sure that there is no problem with the USB memory,
then turn the power off, then on again.
Indication Situation Action
Unavailable
Now, Rec Mode
This is displayed when the [EXTERNAL/
INTERNAL] button is pressed with Rec
Mode “ON.”
When Rec Mode is “ON,” you cannot change the External
settings. To make changes to the External settings, set Rec
Mode to “OFF” (p. 78).
“File name”
Overwrite OK?
A file with the same name is already exists. If you execute the procedure, the file will be overwrite. If you
don’t want to overwrite, change a filename.
Can not Copy
• You attempted to copy an audio file
• You attempted to copy a file to USB
memory even though USB memory was
not connected
• You can’t copy audio files
• Connect USB memory
Panel is Locked
Buttons will not function. Press the [EXIT/SHIFT] button to cancel.
RD-300GX_e.book 86 ページ ２００８年２月１４日 木曜日 午後１時２６分