58

Using the RD-300GX As a Master Keyboard

If you press the [EXTERNAL/INTERNAL] button so the
“EXTERNAL” indicator is lit, you’ll be able to set the following
items.

1.

Press the [EXTERNAL/INTERNAL] button so the

“EXTERNAL” indicator is lit.

The RD-300GX is set to control the external MIDI
devices.
The External screen shown will not appear if “Rec
Mode” is “ON” in Utility edit. Turn the Rec Mode
setting “OFF” (p. 78).

2.

While continuing to hold down the [EXIT/

SHIFT] button, use the [DEC] [INC] buttons to

select the parameter to be set.

3.

Use the ZONE SELECT button to select the Zone

for which you want to make settings.

The indicator of the selected Zone will light.

4.

Use the [DEC] [INC] buttons to set the value.

Pressing the [DEC] [INC] buttons simultaneously sets the
value to “- - -,” “OFF,” or “0.”
Sets the volume and the panning (localizes sound image) for
each of the Tones.
The Volume setting is mainly used when multiple tones are
playing to obtain the desired balance in volume between each
Zone.
The Pan setting positions the sound image of each Zone when
the output is in stereo. With an increase in the value for L,
more of the sound will be heard as coming from the left side.
Similarly, more of the sound will originate at the right if the
value of R is increased. When set to 0, the sound is heard as
coming from the center.
This sets the depth of the reverb and chorus effects.
You can perform with each Zone transposed to a different
pitch.
When multiple Zones are set to on, you can create a richer
sound by setting the two Tones to different octaves. Also, if the
Keyboard Mode is set to Split and you are playing a bass
Tone in the lower Part, you can use the Transpose function to
play the bass at a lower pitch.

Detailed Settings for Transmitted Parts ([EXTERNAL/INTERNAL] Button)

Parameter
Ch

MIDI OUT Channel

MSB

Bank Select MSB

LSB

Bank Select LSB

PC

Program Number

Vol

Volume

Pan

Pan

Rev

Reverb Depth

Cho

Chorus Depth

Trs

Key Transpose

KRL

Key Range Lower

KRU

Key Range Upper

How to Make Settings

NOTE

Adjusting the Volume and Pan

(Vol/Pan)

Parameter TX CC# Value
Vol (Volume)

CC07 - - - (OFF), 0–127

Pan (Pan)

CC10 L64–0–63R, - - - (OFF)

Setting the Amount of Reverb and

Chorus (Rev/Cho)

Parameter TX CC# Value
Rev (Reverb)

CC91 - - - (OFF), 0–127

Cho (Chorus)

CC93

Setting the Transposition for Each

Individual Zone (Trs)

Parameter Value
Trs (Transpose)

-48 – 0 –+48
RD-300GX_e.book 58 ページ ２００８年２月１４日　木曜日　午後１時２６分