Roland RM-700 , Sequential Loading of User Program Sets Stored (Load Next), , Changing the Timing at Which Arranger Settings are Recalled (Arranger Update), , Simultaneously Switching User Program and Transmitting PC Numbers

155
Saving Your Performance Settings (User Program)
When using the pedal to switch your user programs, you can also
call up sequential sets of user programs as saved to USB memory.
This feature is called the “Load Next” function.
If desired, you can specify that when you recall a stored user
program, the settings for automatic accompaniment will not
change unless you continue pressing one of the [1]–[5] buttons for a
short while or continue touching the user program name shown in
the screen for a short while.
You can have PC (Program Change) numbers be transmitted to an
external MIDI device when you switch the user program on the RM-
700.
You can register PC number settings to each of the user programs,
just as you can with button settings and other settings preferences.
Bank Select MSB/Bank Select LSB
Program Change
Tx PC Channel
Sequential Loading of User Program Sets
Stored (Load Next)
Display Explanation
Off
Switches Load Next off.
The next press of the pedal after the 40th user program is
called up returns you to the first user program of the
same user program set.
On
Switches Load Next on.
The next press of the pedal after the 40th user program
has been called up takes you to the first user program in
the next user program set.
Changing the Timing at Which Arranger
Settings are Recalled (Arranger Update)
Display Explanation
Delayed
If you press and immediately release one of the [1]–[5]
buttons, or touch and immediately release the user
program name shown in the screen, only the settings
that are not related to automatic accompaniment will
change.
If you hold down one of the [1]–[5] buttons or continue
touching the user program name shown in the screen,
the automatic accompaniment settings will also change.
Instant
When you touch one of the [1]–[5] buttons or touch the
user program name shown in the screen, the contents of
the corresponding user program will be selected
immediately.
Simultaneously Switching User Program
and Transmitting PC Numbers
Value
0 (00H)–127 (7FH)
Value
1 (00H)–128 (7FH)
Value Explanation
Off
This prevents the PC number from being transmitted.
Channel 1–16 Sets the transmission channel.
RM-700_e.book 155 ページ ２００９年３月１８日 水曜日 午前１１時５分