25

Before You Start Playing

You can connect a microphone to the Mic jack, and enjoy sing-
alongs or tell a story while you play.

1.

Connect a microphone (sold separately) to the Mic jack
on the lower-left area of the instrument.

2.

Rotate the [Mic Volume] knob on left side of the Mic jack
to adjust the volume level for the microphone.

Some Notes on Using a Microphone

Be careful of high volume levels when using microphone late at
night or early in the morning.
When connecting a microphone to the RM-700, be sure to lower the
volume. If the volume control is too high when the microphone is
plugged in, noise may be produced by the speakers.
Howling could be produced depending on the location of
microphones relative to speakers. This can be remedied by:
Changing the orientation of the microphone.
Relocating microphone(s) at a greater distance from speakers.
Lowering volume levels.
You can connect a separately available CD drive (CD-01A) and play
back music CDs or CD-ROMs containing SMF music data. You can
also write songs for which the audio has been recorded to a CD to
create a music CD.

You can also play songs on VIMA TUNES (VIMA CD-ROMs) sold
by Roland.

1.

Turn the CD drive’s power “AUTO.”

2.

Use the screws (3 x 8 mm) to attach the holders to the CD
drive.

3.

As shown in the illustration, fasten the CD drive using the
screws (4 x 16 mm) and the screw holes located on the
bottom of the RM-700.

Connecting a Microphone

Connecting a CD Drive

Attaching a CD Drive

Screws (3 x 8 mm)
Screws (4 x 16 mm)
RM-700_e.book 25ページ 2009年3月18日 水曜日 午前11時5分