195
Connecting External Devices
Here’s how to choose whether the image will be shown on a
television connected to the Video Out jack or an external display
connected to the Analog RGB Out connector.
If both an external display and a television are connected
simultaneously, the image will appear incorrectly on both the
external display and the television.
Here you can specify what will be shown on the external display,
television when the Slide Show, DigiScore, and Piano Roll are off.
You can connect a portable audio player to the Roland Audio Port,
and the music is heard from the RM-700’s speakers.
1.
Turn the front right bottom panel Roland Audio Port
volume knob all the way toward the left to minimize the
volume.
2.
Connect your portable audio player to the front right
bottom panel Roland Audio Port.
3.
In the song selection screen, choose “New Song (p. 77).”
4.
Start playback on your portable audio player, and adjust
the volume with the Roland Audio Port [Volume] knob.
5.
If you want to decrease the vocal portion of the music
from the portable audio player, press the [Center Cancel]
button so its indicator is lit.
• You can change the pitch of the portable audio player. For details,
refer to “Transposing Keyboard Sounds and Songs Played Back
(Transpose)” (p. 122).

Selecting the Video Output Destination

(Output Select)

Setting Explanation
RGB
Analog RGB Out connector
Video
Video Out jack

Selecting the Screen that is Shown when

Slide Show, DigiScore, or Piano Roll are off

(Video Out Mode)

Setting Explanation
Panel
The RM-700’s display will show the same image as the
television or display that is connected to the RM-700.
ROLAND
“Roland” will be displayed.
Black
Nothing will be displayed.
Connecting a Portable Audio Player
R
Red
Portable audio player
L
White
RM-700_e.book 195 ページ ２００９年３月１８日　水曜日　午前１１時５分