18
STEP 2: Sampling
Here we’ll explain how to use Sampling to record to pad [1] of bank J.
1. Make.sure.that.the.[PATTERN.SELECT].button.is.extinguished.
If it’s lit, press the button to turn it o .
2. Press.the.[.REC].button.so.the.button.is.lit.
If you decide to
cancel sampling, Press the
[CANCEL] button.
3. Press.the.BANK.[E/J].button.so.it’s.blinking.
Press.the.BANK.[E/J].button.so.it’s.blinking.
If the button is lit, bank E is selected; press the [E/J] button
once again so it’s blinking.
Pads to which you can sample will blink.
4. Press.the.pad.[1].
Pad [1] will light, and the [REC] button will blink.
5. .Make..STEREO.setting.
Turn this o if you’re sampling in
monaural from a mic, etc.

How this a ects the sampling time

Sampling in monaural will give you approximately twice as much sampling time as stereo.
Monaural sampling also allows you to play twice as many samples simultaneously (12 monaural samples, or 6 stereo
samples).