31
Deutsch Français Italiano Español Português NederlandsEnglish
Exchanging Samples between Two Pads
You can exchange samples between two pads. This lets
you bring together the desired samples into a single bank.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Hold.down.the.[FUNC].button.and.press.the.pad.
[2].(EXCHANGE).
The display will indicate “CHG,” and the [DEL] button and
the [REC] button will light.
2. Press.the.pad.for.one.of.the.samples.you.want.to.
exchange.
3. Press.the.other.pad.
MEMO
You can also select to a dierent bank.
When the two pads have been pressed, the [REC] button
will blink.
4. When.you.press.the.[REC].button,.the.exchange.
will.begin.
When the “CHG” indication in the display has disappeared,
the exchange is complete.
NOTE
• If there is not enough free memory to perform the
exchange, the display will indicate “FUL” and the
exchange cannot be performed.
• Never turn o the power before the exchange has been
completed. Doing so will destroy the SD card.
Copying a Sample to Another Pad
You can copy a sample from one pad to another pad.
This lets you create another sample based on an existing
sample.
MEMO
If you decide to cancel this operation during the
procedure, press the [CANCEL] button.
1. Hold.down.the.[FUNC].button.and.press.the.pad.
[1].(COPY).
The display will indicate “CPY.”
2. Press.the.pad.for.the.copy-source.sample.
Pads that are available as copy sources will blink.
3. Press.the.copy-destination.pad.
MEMO
You can also select to a dierent bank.
When the two pads have been pressed, the [REC] button
will blink.
4. When.you.press.the.[REC].button,.the.copy.will.
begin.
When the indication of “CPY” in the display has disap-
peared, the copy is complete.
NOTE
• If there is not enough free memory to perform the
copy, the display will indicate “FUL” and the copy
cannot be performed.
• Never turn o the power before the copy has been
completed. Doing so will destroy the SD card.