19
Deutsch Français Italiano Español Português NederlandsEnglish
Applying an e ect while you sample
By pressing an e ect button at this time, you can sample the sound processed by the e ect.
MEMO
In this case, you can use the [CTRL 1] and [CTRL 2] knobs to adjust the e ect settings. Because the [CTRL 3] knob is used
to adjust the digital input level, it cannot be used to adjust the e ect settings.
In this case, you can use the [CTRL 1] and [CTRL 2] knobs to adjust the e ect settings. Because the [CTRL 3] knob is used
In this case, you can use the [CTRL 1] and [CTRL 2] knobs to adjust the e ect settings. Because the [CTRL 3] knob is used
In this case, you can use the [CTRL 1] and [CTRL 2] knobs to adjust the e ect settings. Because the [CTRL 3] knob is used
6. .Adjust.the..recording.level
6-1. Produce.sound.on.the.device.that’s.connected.to.the.SP-404SX.(if.you’re.using.a.mic,.vocalize.into.the.
mic).
6-2. Adjust.the.volume.of.the.device.(e.g.,.portable.music.player).connected.to.the.SP-404SX.so.that.the.
PEAK.indicator.lights.occasionally.
Adjust the volume of your audio source (e.g.,
portable music player)
MEMO
If the volume of your device is not adjustable,
and the PEAK indicator stays lit, set the SP-
404SX’s input gain to “-10 dB” as described on p. 39.
If you’re using a mic, turn the [ MIC
LEVEL] knob to adjust the level.
The PEAK indicator should
light occasionally
6-3. If.the..display.illumination.lights.red,.the.internal.digital.input.level.is.excessive;.turn.the.[CTRL.3].knob.
toward.the.left.until.the.display.does.not.illuminate.red.
If this lights red, the digital input level is
too high!
Turn the [CTRL 3] knob all the way to the right, and then turn it
toward the left until the red illumination no longer appears.
Signal fl ow LINE IN jacks [CTRL 3]
knob
Display illumination
MIC IN jack
PEAK
indicator
Input Gain
Refer to p. 39
[MIC IN]
knob
Eff ects
Resampling
Analog signal Digital signal
Adjust so this
lights occasionally
If lit red, level
is too high!